AvantGarde Shed Size XX Large 9x12 Metallic Quartz Grey

Qty: 

Main Item *

AvantGarde Shed Size XX Large 9x12 Metallic Quartz Grey   +£2,299.00

Accessories

		1 x Foundation Kit for Avantgarde Size XX Large Click for more detail Very heavy duty square tube framework which assembles by using pre-formed corner blocks to give accurate sizing. Exactly fits the base rail of the shed. Comes with brackets and long steel anchors for internally securing the foundation kit to the ground. This kit can then be flooded out with concrete or filled with paving slabs or chippings, etc. Important to put a polythene sheet underneath the kit before fill to prevent rising damp conditions. Single pack: 14kg	+£228.00 each
		1 x Floor Covering Kit for Avantgarde Size XX Large Click for more detail 2mm checkered-plate flooring panels made from high quality aluminium. Completely covers the internal floor protecting firewood and gardening equipment from damp. Provides a secure fit making a firm base. Panels slot into place. Requires a layer of 30mm thick polystyrene insulation (not supplied) which is inserted inside the foundation kit and below the covering plates. This provides a cushioned and insulated floor area. Can only be used in conjunction with the foundation kit (this does not apply to the Biohort Woodstock Wall Store). Single pack: 51kg	+£749.00 each
		1 x Two Standard Shelf Kit Click for more detail Two level shelves and four support brackets. Each shelf is L740 x W210 mm. Easily positioned on the wall supports included with the shed.	+£39.00 each
		1 x Four Standard Shelf Kit Click for more detail Four level shelves and eight support brackets. Each shelf is L740 x W210 mm. Easily positioned on the wall supports included with the shed.	+£59.00 each
		1 x Two Deep Shelf Kit Click for more detail Two level shelves and four support brackets. Each shelf is L740 x W515 mm. Easily positioned on the wall supports included with the shed.	+£69.00 each
		1 x Double wall support rail for shelving Click for more detail Vertical supports which clip easily to the top and bottom shed side rails. Required if you wish to extend your shelving around the shed interior over and above the 2 already provided as standard. Use this support rail to fit shelves to the shed at the height your desire.	+£39.00 each
		1 x Four Tall Tool Hanger Set Click for more detail For door interior. Clip on hangers to safely store tall tools. Simply suspend the clips from the top internal rail. Four clips per set.	+£22.00 each
		1 x Single BikeMax Cycle Holder Click for more detail Designed to store cycles in a vertical position to maximise storage space. Storage solution for one bike. Will fit against the interior shed wall at any point where a wall rib occurs. Kit includes a strong vertical upright that will support your bikes front wheel. Will accommodate most sized bikes.	+£39.00 each
		1 x Double BikeMax Cycle Holder Click for more detail Designed to store cycles in a vertical position to maximise storage space. Storage solution for two bikes. Will fit against the interior shed wall at any point where a wall rib occurs. Kit includes a strong vertical upright that will support your bikes front wheel. Will accommodate most sized bikes.	+£69.00 each
		1 x Extra Single Door Kit Metallic Silver Click for more detail Additional access door for the side of shed. Perfect for increasing access and versatility of the shed.	+£395.00 each
		1 x Rainwater Downpipe Kit Metallic Silver Click for more detail Comprises of steel down pipes and all fittings required for both sides of the shed. Simply connects to the shed's gutters.	+£59.00 each
		1 x Small Tool Holder Kit Metallic Silver Click for more detail Steel channel five snap-in tool holders. For installing on the inside of the door.	+£31.00 each

* Required Fields